REAL-TITE® Hex Extension Expansion Plugs—Standard
These plugs are used when the clean out is recessed in a floor or wall and an access hole needs to be covered. The user provides the chrome access cover to cover the opening. The chrome cover is attached to the male/female stop bolt located on the plug.
| Size | Relaxed seals up to | Fully expanded seals up to | Download Spec Sheet |
|---|---|---|---|
| 1.5″ | 1.64” (42mm) | 1.95” (49mm) | View PDF |
| 2″ | 2.09” (52mm) | 2.33” (55mm) | View PDF |
| 2.5 | 2.66” (68mm) | 2.95” (75mm) | View PDF |
| 3″ | 3.30” (84mm) | 3.50” (88mm) | View PDF |
| 3.5″ | 3.82” (97mm) | 4.15” (105mm) | View PDF |
| 4″ | 4.20” (107mm) | 4.61” (117mm) | View PDF |
REAL-TITE® PLUGS are designed with a stop on the bolt, to prevent the lower wedge from becoming dis-assembled from the unit and dropped down the line.
REAL-TITE® PLUGS have an extremely large gasket that seals behind, over and at the tip of the pipe or opening.
REAL-TITE® PLUGS are easy to remove and can be reused saving time and money.
REAL-TITE® PLUGS have a variety of uses including clean outs, test plugs, sealing iron or plastic damaged pipe with threaded or smooth openings.
Your Problem:
A clean out is located several inches behind a wall and a large diameter hole to access the clean out plug must be made in the wall to access the plug.
Our Solution:
Install a hex extension plug with a 6 in. chrome finishing plate to cover the outside access hole in the wall.